At a glance
ClinicalIndex Comparison RecordStandardized by ClinicalIndex from the ClinicalTrials.gov record · verify against the source.
Effect of Surgical Technique on Resection Symmetry of the Patella in Total Knee Arthroplasty
In Brief
A clinical study evaluating Cutting Guide Technique, Haptic Feedback Technique, and 1 other intervention for Arthroplasty, Replacement, Knee and Injuries, Knee. Completed, enrolled 90 participants across 1 site.
Detailed Summary
This research was performed to determine which of the three techniques used by knee surgeons at the Mayo Clinic was the most accurate at the surgical removal (resection) of the knee-cap (patella) in a symmetric fashion during total knee replacement (arthroplasty). Although all three techniques are known to be effective, the three techniques had never been compared to one another to determine if one was more effective than the others at resecting the patella.
Study Details
Timeline
Interventions
The guide is clamped onto the patella and tightened so that it remains stable. The guide has a slot that allows insertion of a standard sagittal saw blade, and this slot guides the blade as it is advanced across the patella. The thickness is then measured in the center of the patella to ensure that the resection goal is achieved. Additional resection may be performed as needed.
It consists of a free hand cut (no guide used) with a standard sagittal saw that is oriented based on osteo-cartilaginous landmarks and haptic palpation of the patella by the surgeon. The resection thickness/obliquity can be altered based on haptic feedback (use of the sense of touch) of the patella. The thickness is then measured in the center of the patella to ensure that the resection goal is achieved. Additional resection may be performed as needed.
Resection is performed in a free handed fashion, but after resection, the thickness of the patella is measured separately in all four quadrants (superolateral, superomedial, inferomedial, and inferolateral). Additional resection is performed as needed based on the quadrant measurements and the measurements are repeated after each resection until satisfactory resection thickness and symmetry are obtained.